» OUR PRODUCTS
SHAPER MACHINE
SALIENT FEATURES

NAGI SHAPERS is featured by its high efficiency, flawless work, smooth and precision finished throughout. All the bearing surfaces of frame, Ram, slide etc. are hand scrapped to ensure accurate alignments.

FRAME : (Main body) its casting is done by mixing scrap and also properly ribbed for rigidity. The prism Ram slides are sufficiently wide. Correct  design and proper weight description eliminates vibrations.

RAM & THE ROCKING ARM : The ram slides are of prismatics section giving ample bearing ares to provide minimum of 80% bearing surface at all cutting positions. The sliding block fitted in the rocking arm is made up of gun mental to provide lasting service. Tool head is mounted on a swivel in order to facilate setting up to 90 on either side.Tapped gibs ensure its permanent accuracy.

MAIN SLIDE : is located on the body by rectangular slides and houses the cross-feed  lead –screw which is power and hand operated  and also the hand operated table raising gears. The vertical movement of the main slide is throughout double jack screw type which is also provided with a thrust bearing. This avoid underneath the bed.

CROSS SLIDE : it is heavily constructed and supported on generous guideways on the main slide and felt vipers are also provided.

CROSS FEED MECHANISM : Automatics is crossfeed is provided both for forward and backward table traverse, controlled by rachet lever. The drive form the bull bull gear shaft to the traverse screw is effected by means of telescopic rod.

WORK TABLE : Is accurately machined having  T slots on the top and slide surfaces. The table can be swivelled  at any angle around and accurately graduated circular disc. It is supported on the stand to help bear extreme thrusts.

DRIVE : The machine is supplied with motor drive, as well as belt drive attachments simultaneously no cost.

CONTROL : The lever enables the operator to step all Mechanical Motion of the machine without switching off the electrical current or the disengagement of the belt.

AUTOMATICS LUBRICATION : T he machine is fitted with automatic lubrication pump for properly lubricated all its main pairs.

STANDARD ACCESSORIES : One heavy duty vice with operating handle.

SHAPER MACHINE
Model 60-N 26”
Model 75-N 32”
Maximum length of stroke
26”
32
Minimum length of stroke
0”
0”
No of speed
4”
4”
Length of Ram
48”
58”
Width of Ram
11 ½
11 ½
Length and width of table top surface
24”x14”
30”x15”
Horizontal travel of table
15”
40”
Vertcal (hand) of travelof table
33”
41”
Jack
Double
Double
Tool hand feed
9”
9”
Length, width & depth of vice jaws
13”×10”×2 ½”
13”x10”x2 ½”
Size of base plate
66”x25”x7”
74”x25”x7”
H. P. required
3
5
R.P.M. of motor
1440
1440
No. of strockes per minture
20, 40, 60, 90
18, 28, 42, 65
Size of motor pulley required
3”
3”
Total weight approximately
16Qnl.
19 Qnl
 
 
Powered by : Idea Net Care   Bulk SMS Providers
© 2009-10 Nagi Engineers All Rights Reserved.